Chemical resistant hand protection work gloves manufacturer 2023: The risk of exposure to hazardous materials and poor-quality protective wear can limit the productivity and safety of workers. Hazardous Chemicals, Liquids, and Oil: Dealing with machines usually in contact with black oils, lubricants, aerosol Spray, gear oil, and chemicals liquids. Rough and Sharp-Edged Objects: Exposed to risks of injuries due to handling machinery works. Hand Fatigue: Long hours of working can cause discomfort in hands especially handling heavy machines or objects. The excellent grip performance of our gloves allows less force required to handle machine parts or objects, thus increasing work efficiency. Read additional information on https://excia.asia/products/hands-protection/?_gloves_category=chemical-protection.
Microfibre is synthetic fabric with very small fibres or threads. The diameter of microfibre is about 20 times smaller than a human hair. The most common types of microfibres are made from polyesters, polyamides or a combination of polyester, polyamide, and polypropylene. The shape, size and combinations of synthetic fibres are selected for specific characteristics, including softness, toughness, absorption, water repellency, electrostatics, and filtering. Features: Breathable fabric; Retains original shape; Comfort is similar to natural fibres and soft; High performance moisture wicking ability; Enhanced durability; Lightweight; Easily maintained and cleaned.
HPPE: High-performance poly ethylene (HPPE) is flexible, light and durable. As resistant to cutting as a para-aramid but with more resistance to abrasion (ten times more resistant to flexion than a wire), it remains resistant to chemicals, in particular solvents. A proper glove fit is crucial in ensuring the dexterity of the working hand. If the glove is too small, it cuts off blood circulation and restricts movement. On the other hand, a glove that is too large may slip off easily and make handling imprecise.
A random sample of gloves is tested for freedom of holes by undergoing a water leak penetration test. The gloves are filled with 1l of water and must remain completely leak proof over a defined period of time. A failed test results in a higher AQL value, which for medical gloves sold in Europe must be 1,5 or lower. AQL (accepted quality level) is a quality sampling procedure ISO 2859-1 used by manufacturers for measuring the % likelihood of pinhole defects in a batch of single use gloves. An AQL of 1,5 brings a statistical probability that less than 1,5% of the gloves in the batch will have defects.
How It Works: EBT materials added to nitrile during production. Gloves are disposed of by consumers. Gloves are transferred into biologically active landfills. Microorganisms break down the EBT materials, to decompose within 1–5 years. Organic soil and biogas is left in its place. Join SHOWA and find your EBT glove below. Make the difference today. DURACoil: Since the revision of the PPE regulations in 2016, a market-wide downgrade in EN 388 and ANSI 105 cut level scores for re-certified products led to general purpose gloves for medium-low risks decreased from cut level 5-C/A3 to 5-B/A2 and under. At SHOWA, we believe in value for money, safety and comfort. Research shows that many workers use general purpose gloves with low cut resistance levels – the former EN 388 and ANSI cut 5 being B/ A2. Risks of injuries increase and worker’s safety is jeopardised.
Working in an automotive setting exposes mechanics to high risks including handling dangerous parts and tools as well as dealing with hazardous fluids and chemicals. Risks of mishandling: Automotive assembly line required workers to handle small parts with high precision and efficiency. Risk of Injuries: When one works with slippery parts of vehicles, slips may occur and cause serious open wounds. Exposure to hazardous fluids: Workers are susceptible to hazardous substances and chemicals like petrol, solvents, degreasers, paints, and other cleaning liquids. See extra details at https://excia.asia/.